To plating equipment according to the provisions of the electroplating process, electroplating processing, switching power supply and plating tank is not enough, but also must have some to ensure that the electroplating equipment all normal production and manufacturing of auxiliary machinery and equipment. Including heating or plant cooling, negative pole moving or stirring machinery, plating
Author: Robby
To plating equipment according to the provisions of the electroplating process, electroplating processing, switching power supply and plating tank is not enough, but also must have some to ensure that the electroplating equipment all normal production and manufacturing of auxiliary machinery and equipment. Including heating or plant cooling, negative pole moving or stirring machinery, plating solution circulation system or filter equipment and its plating tank essential accessories such as electric level bar, electric level transmission line, anodising and anodising basket, plating fixtures and so on.
1. Temperature raising or reducing equipment
Because the plating process solution must work under a certain temperature, the plating tank will be equipped with temperature-raising machinery and equipment. For example, the plating of bright nickel must be plating solution temperature maintained at 50 ℃, plating equipment price stainless steel must be the temperature is 50 ~ 60 ℃, and acid-base bright copper plating or bright gold plating and the temperature within 30 ℃. In that case, this processing technology must be stipulated with heat exchange equipment to consider various aspects. For warming up the general selection of direct heating methods.
2. Negative pole moving or stirring equipment
There are some plating types that is to say, the vast majority of plating types must be negative pole in the shaking situation, that can increase the work of the electric current, so that the plating solution to give full play to the required effect (generally gloss and dispersion of the ability to work), but also to avoid, the edge of the plating hair, burnt paste. There are some kinds of plating can use mechanical equipment or gas mixing instead of negative pole moving. Mechanical mixing is made of corrosion-resistant raw materials to carry out the stirrer, generally driven by an electric motor, but the speed ratio can not be too high. Gas mixing is used to compress air that has been filtered to remove oil stains.
Electroplating equipment necessary machinery and equipment is mainly rectifier power supply, plating tank, anodising and switching power supply transmission line, but also according to a certain recipe configuration of the plating solution. To make the whole process of electroplating process with scientific research or industrial production value, must carry out the whole process of electroplating process manipulation, that is, in accordance with certain production processes and processing technology to carry out the electroplating process, but also to use some auxiliary machinery and equipment and management methods of machinery and equipment, for example, filter presses, heating or plant cooling, inspection machinery and equipment, testing equipment and so on.